Introduction to new aluminum alloy tube

1. The surface and mouth of the new aluminum alloy tube are treated with AI2O3 as a whole. Through 500 hours of salt spray test, it has very good corrosion resistance, and has insulation and adiabatic characteristics.

2. The bending, expansion, ductility, pressure resistance and violence resistance of the pipe are comparable to those of ordinary copper pipe.

3. This product has been widely used in all kinds of air conditioning, refrigerator, freezer and other industries.

4. At the same time, high strength aluminum alloy nuts with insulation are used to eliminate the root cause of electrochemical corrosion.

5. Aluminum alloy tube can be cut into arbitrary length. If you need to extend, you can use special insulated aluminum alloy wire and nut extension pipeline, or use the Locklin ring butt. No spot welding required.

6. The comprehensive procurement cost is reduced by % than that of copper pipe, and the service cycle is the same as that of copper pipe.

Main product specifications:

Φ 6/0.8/0.9 0.8/0.9 Φ Φ 6.35 * 9.52 * 12 / Φ Φ Φ 15.88 * 12.7 * 0.9 1.0 Φ 19.05 * 1.0/1.2

Can be according to customer needs to scale or coil, mosquito coil supply.

1, the use of high-quality alloy aluminum pipe, the whole process of online inspection, at the same time to increase the wall thickness of the pipe, improve the reliability of the product. 2, the overall surface of the tube body Al2O3 anti-corrosion treatment (anti-corrosion layer of 5um ~ 8um), salt spray resistance test for more than 500 hours, and has insulation and adiabatic characteristics. 3. There are no welding points in the whole pipe, so as to avoid potential leakage caused by welding points in later use. 4, the use of high strength aluminum alloy nuts (also by anti-corrosion treatment), to eliminate the cause of electrochemical corrosion.